Member owned: David K.
Author: David Kent
Metal Lathe, Clausing
Our large metal lathe, 3 & 4 jaw chucks and collet attachment
Box and Pan Brake
Grizzly G5769 48″ box and pan brake
Purchased with a grant from the MassDevelopment Collaborative Workspace Program.
CNC Milling Machine (4 axis)
Tormach PCNC 1100 with 4th axis, tool setter, probe
MACHINE CODE REFERENCE INTRODUCTION
PathPilot HUB (free on-line simulator)
Purchased with a grant from the MassDevelopment Collaborative Workspace program.
We’ve ordered the Kniterate CNC knitting machine
Our Kniterate CNC Knitting Machine is due in April. Check out the video of this amazing machine.
CNC Milling Machine, 4-axis
Tormach PCNC1100 CNC milling machine with 4th axis.
Create a free account on PathPilot Hub and access their on-line simulator
Tormach PCNC1100 series II manual
CNC Router
ShopBot PRSstandard Buddy BT48 with 4HP spindle and 8′ power stick which provides 4′ x 8′ cut area.
Metal Bandsaw

Technical Data: 4″ x 6″ cutoff bandsaw
User Manual: user manual (http://manuals.harborfreight.com/manuals/93000-93999/93762.pdf)
Leased By: David Kent
Safety Considerations:
Certification Process:
Framingham Makerspace is expanding
We’re adding 1000 sq-ft across the hall.
This expansion will include 4 studios (10×17 feet each) and a 20×17 foot textile/fiber arts room.
We are finalizing things with contractors and expect to start demolition work in early December. We’ll need our members to provide lots of labor to keep this project on budget and on schedule. Our lease starts February 1st and the landlord has given us early access to start work.
Guatemala School Project
Recently, Framingham MakerSpace members provided tools and labor to establish a woodworking shop and taught Scratch computer programming at Bendición de Dios, a non-profit private school in Alotenango, Guatemala. While there, we visited some homes and were appalled at the living conditions. Rusted corrugated steel walls and roof, dirt floors, chickens and dogs roaming throughout, a single 6′ x 8′ bedroom for the entire family, an outdoor “kitchen” with a wood fired stove creating smoke that made breathing extraordinarily difficult.
Asociación Bendición de Dios has upgraded more than a hundred of these hovels with a concrete bedroom and bathroom over the years, but the process has been necessarily piecemeal. The founder/director, Julio Garcia Gonzalez, explained to us that land ownership was necessary in order to build a house, and few of their families have access to the required money. We asked what it would take to buy a piece of land for many houses to be built from scratch. He said he could get land for 15-20 homes for about $30,000, and if he could get the land, he has donors and other means to build the houses. An anonymous donor committed to providing the initial payment of $10,000 to establish the fund. We still need to raise $20,000 within six months.